Radio Christmas

Find out how the Radio Christmas helps children in Latin America every Christmas using BW Broadcast transmitters.

Radio Christmas is a small charity radio in the UK, which is run by volunteers to support projects in Latin America. Both the charity behind the radio, Street Kids Direct, and the radio was founded by Duncan Dyason, a youth worker who has a passion for reaching children and young people on the margins of the society.

The radio has been run every Christmas since 2008, and the charity guarantees that 100% of all its donations go directly to the projects they are supporting in Latin America. The Radio Christmas is using our FM transmitters, and Duncan has said they couldn’t be happier with our products and service:

Duncan Dyason Christmas Radio BW Broadcast

“We took your advice when we had an issue with it, all because we had not connected it properly. Your tech team were available in minutes to resolve the problem.

We really appreciate your support through a crucial time, we would recommend BW Broadcast to anyone for not just great products but also for superb support, which is invaluable.”
Duncan Dyason

BW Broadcast Radio Christmas

Click here to find out more about the Christmas Radio, or make a donation here




Categories: Testimonials

Radio World Industry Roundtable

Radio World publication have recently gathered around a group of industry professionals to discuss recent trends in FM transmitter technology.


Including our Managing Director Scott Incz, the group provided their views on the current trends in the FM broadcasting technology. Find out more below:

The transmitter is the final leg of the radio broadcast chain. No matter how good the chain is up to that point, failure at the transmitter will render the whole effort for naught.
But changes are coming, disrupting big iron. Radio World talked to some of the leading transmitter manufacturers about what is on their radar these days.

Joining Radio World in a Q&As discussing Transmitter Technologies were our Managing Direct, Scott Incz, along with Rich Redmond, Chief Product Officer at GatesAir’ Chuck Kelly, Director of Sales at Nautel, Thorsten Becher, Vice Director Sales at Transradio and Eric Pere, Broadcast Project Manager at WorldCast.




What is the hottest thing in transmitters these days?

Chuck Kelly: I’d propose that there are two themes driving innovation in our industry today, intelligence and integration; and they are interrelated. By intelligence I mean harnessing IP, local remote data gathering, processing power and connectivity. Mixing these elements has created new options for automatic audio backup and local playout, unprecedented control and opportunities for a true digital path right through to the exciter for optimum loudness and sound. Integration, as a byproduct of harnessing the intelligence in sensible ways, helps engineers reduce the component count in their facilities and do more with less in a positive way. When fewer boxes or components are needed, fewer things can fail and there can be less cost by integrating features in the transmitter. Examples of these two themes working together include integrated audio processing, remote control, codecs, fail-safe systems, etc.

Scott Incz: The advancement in transistor technology, which enables transmitters to be more compact, run cooler and have longer lifespans, especially with the introduction of LDMOS devices. Additionally, one of the hottest things is IP connectivity — not only for remote control monitoring but also for the delivery of audio to the transmitter via the network protocol, such as AES67 and others.

Rich Redmond: Transmitters are going in two directions. They either seem to be built for higher and higher power capabilities, often liquid-cooled in design, to deliver HD Radio and other digital formats, or they are getting simpler and simpler for lower power. If you think of translators, certain Class A stations at very high elevations, educational FMs, and single-frequency boosters, there is a lot of activity in relatively low-power levels under 1 kW. Over time, those transmitters have had more capabilities added, but they get much simpler to operate. And both low- and high-power transmitters have also grown far more compact.

Thorsten Becher: We like to talk about long- and medium-wave broadcast transmitters, which we feel are transmitters offering a DRM power equal to typically 80 percent (or even more) of the AM carrier power with MER >30 dB.

Eric Pere: It makes me smile to hear of “hot topics” in the FM transmitter market given that it has been around (at least in stereo form) since the 1960s. It is truly amazing to think that it is still so prevalent and has not undergone any major technological changes in that time — just adapting modern technologies to work with old and existing FM systems is in itself a major task. Not that there have not been any changes but, when it comes to transmitters, engineers are notoriously conservative. Most people would never contemplate buying a CRT TV over a flat screen just because it’s “proven technology” but the critical role of the transmitter coupled with the expense involved means that change will come much slower than in other areas. Personally, I think that the time has come to make the definitive switch to digital audio and perhaps even digital MPX. Digitizing an analog MPX signal may not be ideal but we can multiplex various signals in a digital stream in a much more efficient way.



Is liquid cooling the answer for harsh environments?

Liquid cooling would appear to be a winner for closed-loop cooling systems and climates with sites that need almost constant AC like desert or tropical regions. Energy savings should pay for the transmitter in a few years. Few offer this option so far. Is the market just not big enough or what are the reasons it has not gained more traction?

Rich Redmond: GatesAir has been in the liquid-cooled transmitter business for nearly 50 years, including high-power AM and TV transmitters. While liquid-cooling is relatively new to FM, the technology, and its benefits are not new to GatesAir.
It does require a certain skill set to operate that not all engineers possess. These systems are a little more complex and will require some training to learn if the customer does not have prior experience. GatesAir provides that training for customers both new to and experienced with, liquid-cooled transmitters. In some places, the climate doesn’t necessarily call for liquid-cooling. In warmer climates, where irrespective of the temperature you want to run a closed-loop system with air conditioning, there are distinct operating advantages with liquid cooling. But they require more attention than an air-cooled transmitter, where you are simply dumping air into a room for cooling. Each station needs to decide what is most appropriate for their situation, and where they feel comfortable. But we are fans of liquid-cooling, and it offers a very attractive ROI for sites that have significant cooling needs and costs. It is a technology that we are comfortable with, and we have led the industry on the liquid-cooling innovation front for many years.

Thorsten Becher: Both techniques, air-cooling and liquid-cooling, have their particular pros and cons. From our point of view, the major drawback of liquid-cooling is potential leakage, either during normal operation or, particularly, in the course of maintenance work. There is no means for hermetically sealing a liquid-cooling system, thus there remains some risk of water drops affecting sensitive transmitter electronics, or even worse, provoking injury to people due to water contacting mains wires.

Eric Pere: Generally, FM transmitters operate far more efficiently than DTV or DAB transmitters so, the advantages of water cooling aren’t as significant in the FM sphere.
If a manufacturer does wish to produce a water-cooled FM system, they can opt for one of two approaches. The first option requires a significant initial investment by the customer but delivers a highly-efficient and effective performance. This is the route which we at WorldCast Systems chose when, in 2004, we developed a liquid-cooled FM transmitter under our Ecreso brand. For us at that time, it was less about operating at high ambient temperatures and more about improving the reliability of the system. We utilized technologies initially created for the railway industry to reduce the temperature of the power-related components such as the power supplies, RF, coupler etc. We also deployed DC/DC conversion techniques used in distributed computer architectures for greater overall efficiency. The result was a reduction in the total cost of ownership and to the carbon footprint of the system but customers have to be prepared to make a significant capex spend to acquire it. Another approach that manufacturers can adopt is much more affordable for the customer but, in general, offers little or no advantage compared to an air-cooled system. In order to get any appreciable benefit, you need to have a large number of FM transmitters using a single water-cooling system.
Many also tout the maintenance advantages of a water-cooled system as no air cleaning is required. However, when maintenance is required on the water-cooling system, it requires a complete shutdown of all transmitters — a point often forgotten. Given these reasons, we can see why the market is limited for these systems.

Chuck Kelly: Let me start by taking a look at TV broadcasting, where liquid-cooling has been more commonplace. Liquid-cooling as an alternate to a pure air system has historically been very attractive to larger TV sites where high amounts of waste heat are generated by powerful, 20–40 percent low-efficiency TV transmitters. It is hard to beat the thermal properties of a fluid to move large amounts of thermal energy. If there is a negative related to liquid-cooling in these large installations, it is typically related to the additional effort need for plumbing, approvals and exterior air exchange units. Typically the advantages aren’t compelling enough at low- to mid-power and so in the TV industry, liquid-cooling is largely reserved for higher power transmitters.
When we look at the radio broadcast industry we find dramatically more efficient transmitters, typically in the 60–75 percent range, so radio engineers normally find heat extraction much easier to manage. While there may be some broadcasters with very high power needs and liquid-cooling-friendly sites, the majority can manage waste heat extraction quite effectively using an all-air cooling system. So, this becomes a “your mileage may vary” situation depending on many factors including TPO power, transmitter efficiency, existing air investment versus greenfield site, floor space costs, site readiness for liquid-cooling and local power rates. For new installations, where the cooling infrastructure is not already in place, and where high-power and warm climates incentivize its consideration, a case can be made for the total cost of ownership of a liquid-cooled system. However, the station must be aware that initial cost and installation costs will be higher and the time required for installation will be days instead of hours. Further, only about two-thirds (but not all) heat is transferred to the heat exchangers, so nominal conventional cooling is still required for power supply dissipation. Factory training on the technology is essential, and it may not lend itself to being maintained by non regular contract engineers making only occasional visits. Similar to the TV broadcast situation, for transmitters with lower waste heat generation, air-cooling will continue to be the de facto standard. The vast majority of broadcasters have air-cooling-compatible sites today, so it will be interesting to watch the ongoing trend in preference for air-cooling versus liquid for radio broadcasters as radio transmitters become more efficient and waste heat requirements decrease.

Scott Incz: With efficiencies of modern devices sometimes exceeding 90 percent, the requirement for liquid-cooling is less necessary in FM transmitters, than say, TV transmitters. TV transmitters’ digital waveforms mean lower efficiencies are obtained from power amplifiers, creating heat issues. Liquid-cooling should really be unnecessary and would only increase the complexity of design and build for the manufacturer, and maintenance cost for the customer. We would rather spend time increasing our transmitters efficiency and thus alleviating the need for complex cooling systems. Less maintenance, increased reliability and reduced operating costs. It’s a win-win for manufacturers and customers alike.


 Has the LDMOSFET technology maxed out?

LDMOSFET has been the winning SS RF device technology choice for a number of years. Has that technology been maxed out for efficiency and performance? If not, what other improvements are in the pipeline and if so, are there any new technologies being developed to replace LDMOSFET?

Eric Pere: Today the performance of MOSFET amplifiers is close to the theoretical limit. Those final few percentage points will be the most difficult to obtain, but development continues. As a comparison, 90 percent efficiency was a good performance for switching power supplies a few years ago. Now, with some fine tuning on the DSP, we can obtain upwards of 95 percent. LDMOSFET’s most likely successor waiting in the wings is GaN or gallium nitride. GaN offers low intrinsic losses to achieve high efficiency as well as very large bandwidth with a flat gain over frequency. It is currently more expensive compared to LDMOS and will likely only become an affordable option for FM transmitters following larger scale deployment in the TV market.

Scott Incz: The latest technology of LDMOSFET devices has certainly not “maxxed” out. Our own design engineers are starting to see efficiency close to 90 percent and we believe we can obtain even higher with some of the design concepts we are working on at the moment. This is still work in progress but we hope to reveal more soon.

Rich Redmond: LDMOS is the standard today, and the most beneficial innovations in recent years was the development of 50 V LDMOS. This really ushered in the convergence of robust, cost-effective power supplies from the IT and telecom industry; along with very robust and high-power RF devices. The transmitters can now take advantage of some of the innovations in very-high-efficiency power supplies that come from these other industries. What we continue to see is increased power density in the device. A few years ago, a 500 W device was a fairly large device to have. Today, there are 1500–1600 W LDMOS devices. The technology to cool and handle that amount of wattage in a small footprint continues to evolve. The advances continue, and we’ll continue to see the evolution of LDMOS both in power handling capability, the ability to cool it and energy efficiency. Some of these innovations come from mobile base station market developments, so in broadcast the convergence of 50 V LDMOS really introduces a lot of technologies that broadcasters can take advantage of for very reliable, highly efficient and cost-effective transmitter solutions.
Thorsten Becher: The latest versions of LDMOSFETs seem to have reached some maximum of efficiency and performance limits. Nevertheless, innovation in the semiconductor market never comes to a stop. Remember the microprocessors used in PCs of the 1980s, and compare to today’s high-speed multicore chips used in any cheap smartphone. We are confident that ongoing development in new material compounds, further minimization of the active element size and application of new structural designs will without doubt lead to further improvement until reaching the limits given by physics.
Chuck Kelly: While LDMOS and alternative chip technologies still hold potential for performance gains, unfortunately most chip manufacturers are directing their investment towards the high-frequency or pulse-power devices needed in lucrative, high-growth sectors such as LED lighting, high-power ISM, “big science,” cellular, satellite, military and space. The result is that broadcast transmitter designers today are faced with the prospect of squeezing out incremental performance gains. That being said, our industry is populated with many creative engineers who have proven their ability to leverage chips optimized for other technology sectors and create performance advancements in our own industry.


What is a modern transmitters expected life span?

Radio World: Transmitters used to last 20 and even 30 years before short life cycles for chip versions and computer control entered this space. The same is true for consoles and studio gear. Manufacturers are now telling us 10 years is about the most we can expect. Replacing large capital items like transmitters at that cycle is not something most station owners can easily budget for and accommodate. What are transmitter manufacturers doing to alleviate that pain?

Eric Pere: Granted, new transmitters nowadays may not last 20 or 30 years but, in general, they are more affordable than they have ever been. This is especially true when you consider the fact that they have (or at least should have!) a built-in digital exciter and a much-improved total cost of ownership as well as being more compact than previously.
And of course, computer control also brings some great advantages such as the ability to monitor every single part of your transmitter in great detail. We are very fortunate at WorldCast to have great experience in monitoring and control through our Audemat branded products and we apply this expertise and technology throughout our Ecreso transmitter range. This has resulted in features such as Expert Maintenance Reporting (EMR), which sends the user regular reports on the status of key parameters as well as information on the performance and lifespan of components. We also have a new SNMP management software suite called WorldCast Manager which provides performance and alarm information on not just the transmitter but all devices across a network.

Chuck Kelly: At Nautel we talk a lot about the long view. We know our customers buy equipment for the long haul and we do our best to design our whole offering: transmitters, reliability, serviceability and support in a way that supports that long vendor relationship. In fact, even the ownership structure of our company is supportive of the long view approach. Our experience is that we are still seeing many customers maintaining our systems for multiple decades, but we also do see the impact of an increasing pace of technological innovation that causes some customers to replace systems earlier to gain new capabilities or efficiencies. For instance, our higher efficiency transmitters sometimes justify an earlier technology upgrade to attain lower operating costs. Another example would be a customer who can change the way they monitor their facilities thanks to modern sophisticated control capabilities afforded by Nautel’s Advanced User Interface. Digital radio components also tend to have a shorter replacement cycle given the pace of change in the digital broadcasting space. So while we still see and believe in the long term view, there are situations where customers are choosing to change out equipment at a faster pace than may actually be required through the lifecycle of the product.

Thorsten Becher: A good work rule in the early design phase is to select and use well-proven components known for their long-lasting availability in the market. More complex devices such as embedded computers or touchscreens should be, both electronically and mechanically, of an easily replaced design. What really counts is energy costs, reliability, ease of maintenance and availability of spares for a long period of time. Following this rule, Transradio manufactures transmitters with minimum maintenance requirements, and can provide spare parts for typically 15 years or more.

Scott Incz: The advances made in transmitter technologies have actually led to an increase in reliability, cost and lifespan of transmitters. The reason many stations may look to upgrade transmitters after 10 years is to take advantage of features that the newer transmitters will offer them. Each generation of transmitters is more efficient, more reliable and offer stations flexibility, sometimes integrating other products to create a “one box” solution. Stations may actually find it more cost-effective to upgrade to a greener, more reliable, less maintenance heavy transmitter, than continue with their existing one. The cost of transmitters is actually far less than it was 20 years ago, so even smaller stations can take advantage of upgrading to keep up with the larger networks.

Rich Redmond: There was a period of time when computers lasted for a very long cycle. Transmitter designs, like computers, have changed over time. Part of it is the sophistication: Transmitters that lasted 20-to-30 years had relay-type control and/or very large transistor logic. They had a single tube and a blower inside to cool them. They also weren’t incredibly efficient like today’s transmitters, which have the benefits of soft failure, solid-state and high-efficiency advances. Often, the replacement cycle is not because the product wears out; it’s that certain devices within that transmitter cease to be available.
If you look at the price of transmitters now compared to then, they are much more cost-effective than they were a number of years ago. In the early 1990s, a 1 kW FM transmitter might cost you $16K. Today, a 1 kW is generally under $8K. The prices have dropped, and they are easier to repair and maintain over time. Engineering resources are also more efficiently put to use; weekly trips to the site, and consistent tube cleanings, are eliminated. Lighter weights from today’s more compact transmitter footprints often allow single-engineer maintenance. So overall, the capital investment of buying, installing and maintaining a transmitter is substantially less expensive, even when considering the quicker replacement cycle.



What are the most common failures?

Radio World: In general, what are the most common failure modes of modern designed transmitters manufacturers are seeing in the field? Lack of cleaning and maintenance plus improper grounding and lightning protection are certainly the major ones, but what are the others?

Chuck Kelly: The vast majority of failures can be traced to lack of maintenance, improper grounding or poor lightning protection (ties to grounding). It’s hard to say there’s another common failure mode beyond those — short of the ones that result due to customers not keeping up with software updates. It’s important to remember that we frequently use software updates to perform hardware changes (adjusting amplifier bias levels, power supply output voltages, etc.). Therefore, what we used to do by sending out a bag of parts and an instruction sheet we now do with a software update and not implementing these updates can have a direct effect on equipment reliability.

Eric Pere: Generally, poor or unstable mains supply is one of the most common causes of failure observed. In many awkward transmitter locations, mains electricity is subject to large variations, short dips and interruptions which means that voltage regulators, inverters or generators are often necessary. However, these can also generate some unexpected variations when switching or adjusting the voltage. Most modern transmitters use switching power supplies which can easily manage voltage changes but several, quick variations generate large current peaks which, in turn, generates a lot of stress for their active parts. This was not an issue for the old linear-style power supplies but their poor efficiency and noisy AC behavior rendered these obsolete.
Scott Incz:  Lightning protection is incredibly important and is responsible for some in-field failures, but we see many more power supply failures due to AC main surges or dirty power, this is especially a problem in emerging markets.

Thorsten Becher: From our experience, the predominant cause for failure is an inadequate cleaning of air filters by maintenance staff. In few cases, also high spikes on the mains supply lines have been encountered.
Radio World: How much longer will high-power tube transmitters be relevant in our business? Many engineers worry that if companies that make and rebuild tubes like Econco/Eimac and Richardson decide to stop producing or close their doors, that will mark the end of this era.

Rich Redmond: High-power tubes will remain relevant for the foreseeable future for a certain customer base. This will continue to dwindle as the engineering base shifts to a younger, more IT-savvy generation. Fewer engineers entering the market today do so as RF specialists. More often, RF is a trade they learn, or outsource to firms with experience. However, today’s solid-state transmitters are often sensible for younger engineers that have IT experience, and there is a quicker learning curve when it comes to maintaining the transmitters thanks to design benefits such as hot-swappable PA module and power supply replacement. But the change will continue over time, and there is still a need for vendors that make tube transmitters, and make and/or rebuild the actual tube components.

Chuck Kelly: Tube technology is still the most efficient, cost-effective approach to high-power shortwave transmission where quick frequency changes are made over a wide frequency range. However, in AM and FM systems over all power ranges, solid-state has become the preferred technology as it has evolved to be more cost-effective, more fault-tolerant and offers higher performance than tubes. And yes, the writing seems to be on the wall for tube suppliers/rebuilders. In AM and FM broadcast at least, it’s hard to imagine a scenario where it would be wise to specify a tube in a new design or purchase.
Thorsten Becher: Today, all broadcast bands ranging from longwave up to band IV/V for DVB-T(2) and, literally, each RF power in the respective band can be served with all solid-state transmitters. Thus, we consider tubes no longer relevant for new transmitter investments. But agreed — as soon the few remaining companies in this business such as Eimac or Richardson close down production or refurbishment of power tubes, the tube transmitter era will come to its final end.
Scott Incz: Not so relevant because long-life solid-state amplifier parts, including the latest LDMOS technology, are producing longer lifetime, more compact levels of high-power RF. It is probably accurate to say that the tubes won’t be around for much longer, at least for broadcast applications.




What’s the future for transmitter technology?

Radio World: Put on your science fiction cap. What fantasy yet possibly-doable-someday transmitter technology do you wish you could invent, perfect, bring to the market at an affordable price? 

Thorsten Becher: Just my personal fantasy — making a transmitter offering the same RF power in a cabinet of half the size and weight than today, saving production costs and simplifying shipment in the entire world.

Rich Redmond: Imagine a high-power transmitter that is 100 percent efficient and the size of a college dorm fridge. Once we have reached that point — and the day will eventually come — there’s a high chance that there won’t be much more room for innovation. In the meantime, we will continue to work toward that goal.

Scott Incz: A supercool, super-efficient, super-reliable transmitter, in an unbelievably small box! It would need to have superconductivity in the power supplies and RF amplifier stages, an RF amplifier output requiring no cooling and minimal real estate. It would need increased high-power FET devices that need little matching to the antenna stage, as well as a single-chip IP audio to on-channel modulation capabilities. It’s not here yet, but we are getting there.

Eric Pere: I can imagine some kind of high power RF DAC to achieve direct to RF output modulation. On the other hand, it is more likely that, after being around for a century, FM broadcasting will be replaced by a new way of listening to radio. I still dream that it could be possible to achieve highly-effective digital radio with affordable receivers and good coverage but if we continue to pretend that it already exists, it will probably never actually happen.

Chuck Kelly: Well, with ATSC 3.0 we may see a lot of broadcasters implementing SFNs … we should watch that space. As a company we’ve explored some work on making portions of the radio broadcasting spectrum all-digital and yet live comfortably within the existing analog and hybrid digital spectrum allocation. We still see generous amounts of room for dreamers and innovators in radio broadcasting. We’ve been fortunate to be able to hire a lot of fresh designers over the past few years and we look forward to the contributions they will make in the coming years.
Looking even farther out, we envision that all broadcast content will be data, reconstituted at the receiver to be separated out and readied for consumption. Broadcast AM/FM/TV will continue to be relevant as long as the cost to distribute that data is less than other methods. Read the full article on Radio World.


Take a look at our award winning transmitter range and discover how their unique feature will take the stress out of managing your radio broadcast.



Categories: Other Posts

European Radio Show 2017

Come and see our team at the European Radio Show 2017! Taking place at the Grande Halle de la Villette from 29 – 31 January 2017, the show brings together radio broadcasting experts from across Europe.

In 2017, the European Radio Show has made Britain the guest of honour, which we are very excited about. BW Broadcast has been producing professional radio broadcasting equipment for over 20 years, and we look forward to sharing our knowledge and award-winning products with the European Radio Show visitors in January.

Come and meet us in Paris to find out more about our new range of products and get free advice for optimising your radio station. At the European Radio Show, we will be showcasing the following:

  • RBRX Encore
  • ModMon Encore
  • Ariane Encore
  • DSPXmini Encore

Here’s a little sneak peak of the RBRX Encore, which you will be able to test at the European Radio Show:

If you are not able to join us in Paris, then why not contact your local French dealer, PHF and book a free demo now?! Click here to find out more



Categories: Events

Are you at risk of hackers?

When purchasing any new broadcasting equipment one of the first things you must do is change the password. Using equipment with default passwords leaves your station open to the risk of hackers, and could allow anyone who knows the default password to log into your equipment remotely and take control of your broadcast

In April 2016, a Texas-based country music radio station KXAX FM became a victim of hackers, who hijacked the station for 90 minutes replacing their regular pop music with an adult-themed podcast. In this case, the radio hacker built a database of unsecured Barix devices and then broke into as many devices as possible and locked out the radio engineers from the units. Read more about it here.

Following the incident, The Michigan Association of Broadcasters published an advisory for all stations to secure their units with strong passwords. We urge all our customers to do the same in order to avoid any similar incidents and secure their radio station.

Set up your new password in seconds

This video shows you how quick and simple changing the password on BW Broadcast equipment is. In less than 30 seconds you can ensure your equipment is protected against any malicious activity. Our passwords are extremely secure and can be up to 15 characters long. We recommend using a combination of upper and lowercase characters as well as numbers for a strong and more secure password.

If you need any help contact our technical support team or have a look at the individual product’s appropriate manual from our downloads section.



Categories: Other Posts

Engetec 2016

Come and meet us at Engetec 2016 Broadcast Workshop in Brazil! The exhibition takes place from 18 November – 20 November 2016 at Rafain Palace Hotel & Convention Center.

Engetec, is a 3-day event for engineers, technicians, announcers, sound designers and all broadcasters who are keen to stay up to date with new developments in the broadcasting world.

Besides showcasing the newest technologies, international experts, from around the world, will demonstrate the newest practices, challenges and solutions to help radio stations compete in a multimedia universe.

This is your chance to meet the team behind our award-winning products, get answers from the experts and learn how to get the most out of your equipment. On the second day our Production Manager, Ricardo Da Silva, will be giving a presentation about the latest developments in FM broadcasting and learn how our new Rebroadcast Receiver, the RBRX Encore, will make rebroadcasting at tricky translator sites a breeze, guaranteeing you the best possible signal at all times. Meet him between 3 and 4 pm on Saturday, 19 November.

We will also be demonstrating our fantastic Encore range:

  • Ariane Encore
  • DSPXmini Encore
  • ModMon Encore
  • RBRX Encore
We hope to see you there! If you are not able to meet us in Brazil, then why not book your free, no obligation demo now with your local dealer? Click here to find your local contact

Find out more about the RBRX Encore and its fantastic features:



Categories: Events

IBC 2016

BW Broadcast will be exhibiting at IBC, between 8 – 13 September 2016, at RAI Amsterdam, Netherlands. 

Don’t miss this event!

Our team will demonstrate how our brand new Encore range of products will improve your radio station – improving it’s sound, increasing listenership and taking the stress out of managing your station.

IBC sits at the global crossroads of the electronic media and entertainment industry and provides a full and vibrant experience, whether you are a student or CEO, an innovative start-up or media superpower. Held at the world-class venue, the  Amsterdam RAI every September, it is always at the forefront of industry innovation and provides unrivalled networking opportunities. Join 55,000 attendees from more than 170 countries and find us from hall 8, stand E73.

At the IBC Exhibition, you will be able to meet us and get a hands-on experience to test out a range of our award-winning products:

Besides trying out all of our products yourself, we will also provide you with a personal advice and recommendations for your radio station using years of knowledge in the FM broadcasting industry.

We look forward to seeing you at the exhibition, and as a complimentary gift, all our stand visitors can get a FREE visitor pass to the IBC tradeshow. Simply use the code 11752 on IBC website and complete a registration form to receive your free pass. Click here to register now. 

Can’t make it? Why not contact your local dealer and arrange a free, no-obligation demo now to see if our products could rock your station. Click here to contact your local dealer. 

IBC 2016 Amsterdam floor plan BW Broadcast



Categories: Events, Other Posts

Perfect rebroadcasting

We discuss why buying a rebroadcast receiver with dual tuners will be the best decision you’ll make.

Firstly, let’s clear up the difference between ‘dual tuners’ and ‘dual inputs’.

Dual Inputs

Some re-broadcast receivers on the market have dual inputs, this allows you to have two antennas into one re-broadcast receiver. What that means in real terms is that should you have a problem with one antenna you can keep receiving on the other – it’s a useful feature, but that’s all it does, it doesn’t offer any diversity features or other benefits.

Dual Receivers

Having dual receivers, on the other hand, will offer you this plus a whole host of other benefits. It guarantees you will always be re-broadcasting the best possible signal and gives you single or dual-frequency diversity.

The RBRX Encore is the ONLY rebroadcast receiver on the market that has dual tuners!

5 ways dual tuners guarantee you THE perfect rebroadcast!

1. Automatically chooses the best signals – No monitoring or adjustments required! You can provide the receiver with a choice of two RF signals and allow the receiver to dynamically and intelligently chose the best signal to use. This gives you the peace of mind that you will always be rebroadcasting the best possible signal without the hassle of having to continually monitor your broadcast and make adjustments.

2. Position each antenna to ensure you get the best signal, even if things change
You can position each antenna completely differently. Different heights, direction and polarization (vertical or horizontal) to receive the best signal under different conditions. This is particularly useful if you are trying to receive a distant signal which is affected by the atmospheric condition. Or at a site where typography or buildings clutter can have an effect on the signal. These can be the trickiest installations as antenna position is not always obvious and can change greatly from day to day. A receiver with dual tuners means you’ll spend less time on site trying to set up the best position, only to find later that the situation has changed and you have to go back to the site to re-adjust, and then again, and again and again – a very tedious task!

3. Let the RBRX Encore worry about what’s the best signal to rebroadcast.
Dual tuners allow you to pick up two different frequencies and rebroadcast them on a third frequency. This is great for repeater situations where you have the choice of two comparatively similar signals strengths to choose from – you don’t have to worry about choosing the wrong, the receiver will do it for you. It also means should one of the signals fail, your rebroadcast with continue seamlessly.

4. Redundancy – If any part of your rebroadcast system fails you won’t go off air.
The benefit of having 2 tuners, 2 antennas and in some cases 2 signals means that if any part of the processes fails you will keep re-broadcasting. Switching from one tuner to another is seamless, no one knows you have a problem, you won’t go off air. Say goodbye to 3am emergency call outs instead you can fix the problem in a timeframe that suits you – you’ll love this feature especially if you have a remote or difficult to access site.

5. Stops third party interference causing you headaches!
Probably the most irritating issue surrounding rebroadcasting engineers talk to us about is the interference caused by a third party. They’ve spent time at the site getting set up perfectly only for a few months later another station switches on a high power unit and the same site and now they’re struggling to get a good clean signal. If your receiver has dual tuners you’ll see a reduction in these types of issues and you’ll spend less time trying to diagnose and solve irregularities in your rebroadcast signal.

So as you can see, dual tuners are an essential feature you should be looking for if you are a serious rebroadcaster.

It will:

• Ensure you’re re-broadcasting the best possible signal
• Reduce time and stress spent at transmission site
• Reduce time spent monitoring your broadcast
• End issues relating to intermittent signal strength and fade out
• Stop off air disasters

It doesn’t yet make you a cup of tea – but we’re working on it ;) Click here to find out more about the RBRX Encore or find your local dealer now



Categories: Other Posts

Power Scheduling

Care about the planet? Want to cut your energy bills? Check out V2’s power scheduling feature and do both

Whether you’re an environmentalist doing your bit for the planet or just interested in keeping your running cost as low as possible, the power scheduling feature on our V2 transmitters will help you do both.



We can’t stop your transmitter consuming electricity, but V2 transmitters have many features to help you keep those bills down.

If you’re a small broadcaster it may not be cost effective to broadcast throughout the night while your audience is tucked up in bed. Although your audio’s off, your transmitter is consuming exactly the same amount of electricity. Power scheduling on V2 transmitters can be set up to automatically reduce the power at this time. Over a year that is a lot of wasted energy and $$$.

Even if you do broadcast 24/7 you may find that during the night your signal may travel further. This means you could afford to turn the power down and still reach the same listenership – it’s definitely worth experimenting.



The V2 transmitters built-in power scheduling feature allows you to set the power to automatically adjust once a day. This is great if you are not going to be broadcasting at the same time every day.


In order to set up the automatic power scheduling to go on once a day, simply follow these eight steps:

1. Go to your transmitter

2. Open the settings

3. Go to RF Settings

4. Select Power Scheduler

5. Make sure the ‘enabled’ option is ‘enabled’

6. Select the transmission power you would like to be scheduled

7. Enter the start time for the power

8. Enter the finish time for the scheduled power

Once you have completed the above steps, your transmitter will be set up to change the power at your chosen time period.


For even more versatility, or to change these settings, you can use the remote control app to adjust to power level on the fly whenever you need, from wherever you are. Click here to find out more.





If you want even more control you can set power scheduling to adjust the power up and down throughout the day as may many times as you want using SNMP. Find out more about SNMP.

Want to find out more about our award-winning transmitters?

Check out the product range here.





Categories: Other Posts

SET Expo 2016

BW Broadcast will be attending at SET Expo 2016 from 29 August – 1September at the Expo Centre in Sao Paulo, Brazil

Don’t miss this event! Come as our guest for FREE, click here and enter guest code SETBWB 

SET Expo is Latin America’s largest event in the broadcasting and new media sectors. Last year, more than 15,000 participants joined together over the 5-day event. 200 exhibitors representing over 400 exhibitor brands spread across 8,000 sqm of space showcasing their most intelligent and sophisticated solutions for capture, production, post production and transmission.







Among others, BW Broadcast will be exhibiting at the exhibition on all days so come and see us! You can find us from stand 62F at Expo Center Norte in Sao Paulo.

Explore our award-winning product range, find out how we can help your radio station and test out the remote control solutions that come with all our products. Among others, you can test out the following products:

  • Brand new Encore range, which is set to revolutionise the FM industry within next few months
  • FM transmitters, including products from our V2 range
  • Affordable ‘single box’ FM translators for smaller radio stations
  • Power amplifiers that can help you boost your signal strength
  • Re-broadcast receivers, including our new RBRX Encore rebroadcast receiver
  • Audio processors to help you achieve your station’s signature sound
  • RDS Encoders that improve your station’s listenership and brand awareness

We will also be there to answer any questions you may have or provide you with a personalised advice to help you and your radio station. So why not register now for the SET Expo 2016! We look forward to seeing you in Sao Paulo.

Not in Latin America? Contact one of our dealers in your region and book a no-obligation demo with them now to find out how our products can make it easier to manage your radio station.


SET Expo 2016 floor plan



Categories: Events, Other Posts

Join us at Amitra 2016!

Come and join us at the Amitra tradeshow in Acapulco from 25 to 27 August 2016The congress will take place at Grand Hotel Acapulco & Convention Center and provides you  with training sessions, development and innovative new solutions for FM broadcasting. 

The Congress reaches its version 39 this year, and Eusebio Maldonado Mejia, president of Amitra said: “This year we have 12 general conferences and 12 workshops equipment. We hope to have about 150 professionals to our most important event of the year. It provides a broad overview of what is happening and what comes to radio and television, as the model of digital TV ATSC 3.0, 4K and trends in AM and FM.” 


Besides showcasing our award-winning product range, we will be hosting a workshop on the various ways you can monitor and control our V2 transmitters.

FM transmitters by BW Broadcast


There are several ways to control our transmitters. Simple Networking Management Protocol (SNMP) allows you to monitor the parameters of your BW Broadcast transmitters in real time. You can find out more about SNMP at our workshop at Amitra. 



Introducing at Amitra

TR300 V2 | Single Box FM Translator 

The TR300 V2 is set to revolutionize the translator market, a ‘single box’ solution that pulls in even the weakest signals and re-broadcast with amazing clarity. It’s the only single-box translator on the market, saving you $$$ on a traditional transmitter + receiver solution. It is also faster and easier to set up, cheaper to maintain and eliminates compatibility problems.

BW Broadcast single box translator solution


BW Broadcast is looking forward to seeing you at the Amitra 2016 Congress in Acapulco! Find us from the ICKROM stand at the Grand Hotel Acapulco. If you are not able to make it then why not request a free, no-obligation demo with our local dealer in Mexico? Click here to get in touch with ICKROM now. 

Not in Mexico? We are also going to be in Brazil from 30 August – 1 September 2016, at SET Expo 2016.



Categories: Events, Other Posts

Thanks for sigining up

Your email has been added to our mailing list.

Close window 


Coming Soon

Close window 

Logged out

You have now logged out

Close window 

Thank You

We will contact you shortly

Close window